YC-018 Mini Spray Dryer
YC-018 mini spray dryer is self contained and supplied complete and ready for immediate operation. All major components are housed within a stainless steel cabinet and the unit can be used on a bench top or with an optional stainless steel stand. The system was designed to be stand by a keyboard, conducted by a colorful crystal screen of touch guidance mode , and allowed two modes of run: Automatic-mode, and eye-monitored mode for the purpose of easily controlling experimental process.
YC-018mini spray applications
YC-018 mini spray dryer can be used in a wide range of applications where the production of a free-flowing powder sample(10-120μm) is required. This technique has successfully processed materials in the following areas:
Beverages • Flavours and Colourings • Milk and Egg Products • Plant and Vegetable Extracts • Pharmaceuticals • Heat Sensitive Materials • Plastics • Polymers and Resins • Perfumes • Ceramics and Advanced Materials •
Soaps and Detergents • Blood • Dyestuffs • Foodstuffs • Adhesives • Oxides • Textiles • Bones, Teeth and Tooth Amalgam and many others. Most solutions and suspensions can be spray dried providing that the resulting product has the characteristics of a solid material.
YC-018 mini spray dryer technique
A menu driven microprocessor controller allows the selection of inlet temperature, airflow, automatic de-blocker frequency and pump speed. The controller features an USB output for connection to a PC or datalogger and software allows the control and monitoring of all functions and printing of results(optional).
l The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber. At the same time an integral compressor pumps air into the outer tube of the jet which causes the liquid to emerge as a fine atomised spray into the drying chamber.
l Heated air is blown through the main chamber evaporating the liquid content of the atomised spray. The solid particles of the material, which are normally in a free flowing state, are then separated from the exhaust air flow by a cyclone and collected in the sample collection bottle. The exhaust airflow is directed through a flexible 60 mm diameter hose direct to atmosphere or to an existing extraction system.
YC-018 mini spray dryer advantages
l Two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process . PLC controller, LCD touch panel control fascia with flow path of system.
l air oilless compressor , the sound is low than 60db
l Made of SUS-316 Stainless steel. Easy operating.
l To assure accurate temperature control and easy parameter adjusting, YC-015 applies PID.
l The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution.. To make sure the process conducted steady and smoothly, magnetic agitator is optional to make the solution well mixed.
l Narrow size distribution of particles.(10-100um)
l Automatic de-blocking device prevents the nozzle from becoming blocked and variably controlled
YC-018 mini spray dryer techniacl information
| Sr.no |
Parameter |
YC-018 Spray Dryer |
| 1 |
Power |
5500W |
| 2 |
Voltage |
220V,50/60 Hz |
| 3 |
Atomizer material |
SUS 316 Stainless steel |
| 4 |
Evaporating Capacity |
4 l/h for water |
| 5 |
Airflow |
0-330 mᶟ/h |
| 6 |
max. Input temperature |
350⁰C |
| 7 |
Heater power |
5000W |
| 8 |
Temperature precision |
±1⁰C |
| 9 |
Spray gas |
4.2m³/h, 2-5bar |
| 10 |
Nozzle jet |
0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available) |
| 11 |
Nozzle type |
Two fluid nozzle |
| 12 |
Possible particle size range |
5-100µm |
| 13 |
Mean Residence time |
1.0-1.5 sec |
| 14 |
Operation mode |
Automatic/Manual |
| 15 |
Max. Sample feed |
3000ml/hr |
| 16 |
Minimum sample volume |
100ml |
| 17 |
Spray chamber material |
SUS 304 stainless steel |
| 18 |
Cyclone separator material |
SUS 304 stainless steel |
| 19 |
Receiving tank material |
SUS 304 stainless steel |
| 20 |
Body material |
SUS304 Stainless steel |
| 21 |
Seal of cyclone/cylinder |
Silicone |
| 22 |
Deblocking |
Automatic |
| 23 |
Sound |
<60db |
| 24 |
Dimensions |
950*750*1700 |
| 25 |
Weight |
150KG |
| 26 |
Display |
7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency |
| 27 |
Thermal protection |
Blower does not stop until temp <90⁰C |
| 29 |
Inert loop (for organic solvents) |
Optional |
Product Tags:
|
|
Benchtop Spray Dryer / Lab Scale Spray Dryer With Touch Screen Images
|
